
MPLAB ? ICE 2000
5.3
DVA14XP280
This device adapter is intended for use with the PIC14000
28-pin DIP device. It has two mechanical switches that
allow target pins OSC1 and OSC2 to be routed to the
emulator silicon on the PCM14XA0 processor module or
the oscillator device on the device adapter, as shown in
TABLE 5-3:
DVA14XP280 DEVICE ADAPTER SWITCH ASSIGNMENT
IN Mode
HS Mode
Desired Function
Switch Position
Set S1 to OSC2INT
Set S2 to OSC1INT
Set S1 to OSC2EXT
Set S2 to OSC1EXT
5.4
DVA16XP140
This device adapter is intended for use with the PIC16C505
14-pin DIP device. It has four mechanical switches. Two of
the switches allow target pins RB4 and RB5 to be routed to
the emulator silicon on the PCM16XA0 processor module or
the oscillator device on the device adapter. The other two
switches control the routing of RB3 and RC5 signals. RB3
can be a general purpose input or MCLR. RC5 can be a
general purpose I/O or can drive the TOCKI input, as shown
TABLE 5-4:
DVA16XP140 DEVICE ADAPTER SWITCH ASSIGNMENT
Desired Function
RC5
RB3
RB4
RB5
MCLR
External Oscillator Input
TIMER0 Clock Input
DS51140M-page 6
Switch Positions
Set S4 to RC5
Set S3 to RB3
Set S2 to RB4
Set S1 to RB5
Set S3 to MCLR
Set S1 to OSC1 and
set S2 to OSC2
Set S4 to T0CKI
? 2006 Microchip Technology Inc.